STARTER Bundle STEPCRAFT D.600 incl. WinPC-NC Full Version

STARTER Bundle STEPCRAFT D.600 incl. WinPC-NC Full Version

SKU: 12620

Category: Construction Kit Bundles

Available in
Delivery time: 3 - 4 Days (Other countries)

from 2.299,00 €

incl. 19% VAT , plus

Choose tax zone / country of delivery

Bundle including STEPCRAFT D.600, MM-1000 DI, End Mill Set "Starter" and WinPC-NC!

Simply strong. The STEPCRAFT D-Series is the perfect entry into CNC technology. Strong, precise, fast and robust. From the milling motor and the 3D Print Head to the Laser and the OTK-3 to the Drag Knife and the Hot Wire Cutter, the multifunction CNC router can be expanded in no time with many optional CNC tools.

This allows you to process a wide variety of materials, such as:

Wood: softwood, hardwood, plywood and artificial wood
Plastics: thermoplastics, ABS, PE, PP, soft/hard PVC, Lexan®, polyamide, Plexiglas®
CFRP / carbon
Non-ferrous metals
Elastomers, duroplastics
Mixed materials

Thanks to the MDF machine table with integrated aluminum T-Slot profiles, workpieces and CNC accessories can be clamped in a quick and easy way. Additional accessories, such as a lubrication system, can also be attached to the two T-slots on the Z-axis. This makes the CNC milling machine suitable for hobbies, model making, education and much more.

With the enclosed construction manual, you can assemble the CNC construction kit in just a few hours. Step by step, the manual guides you through each individual assembly step with the help of easy-to-understand pictures. This way, you get to know every detail of your CNC milling machine and can later carry out maintenance work and adjustments independently.

Supplied with all components necessary for operation
Integrated modular control electronics for an easy connection to the computer via USB or parallel interface
MDF machine table with aluminum T-slots
2A Sanyo Denki stepper motors
Y-axis driven by two stepper motors
All-Steel Motion System™ out of hardenened steel, known from the STEPCRAFT Q-Series
4-track roller guidance
Ready-to-use track rollers, no Adjustment of preload required
High-strength profiles on all axes for optimal distribution of Forces and particularly high torsional rigidity
igus® Energy chains on all axes
Standard Ø 43 mm tool holder enables the use of third-party devices (if necessary with Adapter)
Optimized, integrated clamping system (clamping bars) for plate materials up to 15 mm thick
igus® precision threaded lead screws
Y-axis with Silicone seal to protect against dirt
Two T-slots in Z-axis to attach additional accessories
Up to seven crossbars along the Y-axis for an extremely precise and evenly stiff machine bed
Easy-care and wear-resistant surfaces (powder coating, anodizing)
Made in Germany
5 years manufacturer's warranty
Dimensions (X,Y,Z): 591 mm x 776 mm x 546 mm
Working Space (X,Y,Z): 417 mm x 596 mm x 132 mm
Clamping Surface (X,Y): 436 mm x 679 mm

Complete CNC DIY kit including all mechanical and electronic components
Clamping bars for clamping plate material
USB- or parallel cable connection
Operating and assembly instructions EasyBuild
Milling Motor MM-1000 DI
End Mill Set "Starter" consisting of:
- 1x End Mill Double Flute Upcut 3 mm
- 1x End Mill Double Flute Upcut 2 mm
- 1x End Mill Double Flute Upcut 1 mm
- 1x End Mill Double Flute Downcut 2 mm
- 1x End Mill Spiral Toothed Upcut 2 mm
- 1x End Mill Spiral Toothed Downcut 1 mm
- 1x End Mill Diamond Toothed 2 mm
- 1x Engraving Bit (V-Router) 60°
- 1x End Mill Single-Flute 2 mm
- 1x End Mill Radius 2 mm
Control Software: WinPC-NC Full Version

Needle-nose pliers short
Slotted screwdriver 3 mm
Side cutter small
Tape
Superglue
Allen wrench 2,0 / 2,5 / 3,0 /5,0 mm
Torx 25 HF
Wrench 5,5 mm
Recommendation
- Allen wrench screwdriver 2.0
- Allem wrench screwdriver 2.5
- Slide gauge (Caliper)
- Torque wrench 1.2 - 3.0 Nm

Modern PC with at least 1,4 GHz clock frequency
USB 2.0 interface
Hard drive with at least 10 MB free memory
Windows XP to 11
Intel, AMD-CPU (or compatible CPU) or RYZEN

Operating Instructions

pcs