Buy STEPCRAFT D.420 CNC Router as Ready-to-Run System

Simply strong. The STEPCRAFT D-Series is the perfect entry into CNC technology. Strong, precise, fast and robust. From the milling motor and the 3D Print Head to the Laser and the OTK-3 to the Drag Knife and the Hot Wire Cutter, the multifunction CNC router can be expanded in no time with many optional CNC tools.

This allows you to process a wide variety of materials, such as:

Wood: softwood, hardwood, plywood and artificial wood
Plastics: thermoplastics, ABS, PE, PP, soft/hard PVC, Lexan®, polyamide, Plexiglas®
CFRP / carbon
Non-ferrous metals
Elastomers, duroplastics
Mixed materials

Thanks to the MDF machine table with integrated aluminum T-Slot profiles, workpieces and CNC accessories can be clamped in a quick and easy way. Additional accessories, such as a lubrication system, can also be attached to the two T-slots on the Z-axis. This makes the CNC milling machine suitable for hobbies, model making, education and much more.

With the enclosed construction manual, you can assemble the CNC construction kit in just a few hours. Step by step, the manual guides you through each individual assembly step with the help of easy-to-understand pictures. This way, you get to know every detail of your CNC milling machine and can later carry out maintenance work and adjustments independently.

Supplied with all components necessary for operation (Tools, such as milling motor, 3D print head etc. are NOT included in the scope of delivery and have to be ordered separately!)
Integrated modular control electronics for an easy connection to the computer via USB or parallel interface
MDF machine table with aluminum T-slots resp. optional aluminum T-slots table
2A Sanyo Denki stepper motors
Y-axis driven by two stepper motors
All-Steel Motion System™ out of hardenened steel, known from the STEPCRAFT Q-Series
4-track roller guidance
Ready-to-use track rollers, no Adjustment of preload required
High-strength profiles on all axes for optimal distribution of Forces and particularly high torsional rigidity
igus® Energy chains on all axes
Standard Ø 43 mm tool holder enables the use of third-party devices (if necessary with Adapter)
Optimized, integrated clamping system (clamping bars) for plate materials up to 15 mm thick
igus® precision threaded lead screws
Y-axis with Silicone seal to protect against dirt
Two T-slots in Z-axis to attach additional accessories
Up to seven crossbars along the Y-axis for an extremely precise and evenly stiff machine bed
Easy-care and wear-resistant surfaces (powder coating, anodizing)
Made in Germany
5 years manufacturer's warranty
Dimensions (X,Y,Z): 443 mm x 600 mm x 546 mm
Working Space (X,Y,Z): 298 x 415 x 132 mm
Clamping Surface (X,Y): 316 x 499 mm

CNC machine available without control software or with WinPC-NC or UCCNC.

Complete CNC DIY kit including all mechanical and electronic components
Clamping bars for clamping plate material
USB- or parallel cable connection
Operating and assembly instructions

Needle-nose pliers short
Slotted screwdriver 3 mm
Side cutter small
Tape
Superglue
Allen wrench 2.0 / 2.5 / 3.0 /5.0 mm
Torx 25 HF
Wrench 5.5 mm
Recommendation
- Allen wrench 2.0 screwdriver
- Allen wrench 2.5 screwdriver
- Slide gauge (Caliper)
- Torque wrench 1.2 - 3.0 Nm

PC with 1.6 GHz processor
USB-interface
Windows® XP, 7, 8, 10 (32/64 bit)
MAC OS X 10.3.9 or higher with Windows® emulation

Betriebsanleitung

STEPCRAFT D.420 Construction Kit